Home | About Us | Downloads | Contact | Sitemap
Mumbai : +91-22-2762 0299
Vadodara : +91-76229 99903

Ajmera
International

 
Home / Kinesis / KX Vapor Safe
 

KX Vapor Safe


From Solvent Delivery
 
KX VaporSafe™ Bottle Capsminimize hazardous VOCs evaporating from the reservoir into the laboratory , keep mobile phases clean and securely connect the solvent reservoir with any HPLC system.
 
Safety & Cleanliness
The PTFE body of the cap creates a tight seal against the mobile phase reservoir. Tubing is connected using liquid and air tight fittings into the threaded connection por ts. The air entering the container when solvent is withdrawn is filtered through a 120µm PTFE particulate filter . A built-in check valve prevents solvent vapours escaping into the lab through the particulate filter. All materials used are highly solvent compatible: Polypropylene (collar), PTFE (body) and FFKM (seals), making the caps useable in any LC laboratory
 
Connections
KX VaporSafe™ Bottle Caps for GL45 bottles are available with two or four connection ports. The threaded connection ports allow connecting 1/8”or smaller OD tubing, which is securely fastened using standard ¼” - 28 flat bottom fittings.

Complete
Bottle caps and accessories are offered individually and as complete kits. A kit contains either one or four bottle caps complete with fittings for 1/8”OD tubing and plugs for unused ports
 
 
To the Organic Solvent Waste
KX VaporSafe™ Waste Manifolds contain and adsorb hazardous solvent vapours and connect the LC system safely to the organic solvent waste container, creating a completely closed solution
 
KX Headspace vials
Kinesis KX headspace vials are available with rounded or flat bottom profiles for accurate instrument compatibility . Flat bottom vials have a greater stability;round bottom vials are best for autosamplers that physically move the vials and can reduce positioning errors. The KX range offers 20ml volume vials to fit CTC, Agilent and PE autosamplers.
 
A safer HPLC workplace
The KX-VaporSafe™ Waste Manifold attaches to the organic solvent waste container and seals it air tight.Each manifold offers multiple connection ports for any waste line leaving the LC system to be securely fastened.
The activated carbon filter adsorbs any hazardous solvent vapours. A breakthrough colour indicator shows when the carbon filter is loaded and needs to be replaced. The free spinning collar allows for quick disconnect of the solvent waste container once it is filled.
 
Ready to use
KX VaporSafe™ Waste Manifolds are available to fit a wide variety of standard and specialised solvent waste containers. Manifold kits are the complete solution for HPLC solvent waste. A kit comes complete with:
  • Waste manifold, size specified with order
  • Fittings for 1/8”and 1/16”OD tubing
  • Fittings for 2.2, 2,5 and 3.0 mm metric tubing
  • Adapters for 1/8”, ¼”.3/8”½”and metric ID soft wall tubing
  • Siphoned soft wall tubing for overflow line
  • Activated charcoal filter cartridge (100g)
  • Optional solvent breakthrough indicator
Vapor breakthrough indicator
The colour indicator is designed to indicate the end of ser vice life for the KX VaporSafe exhaust filter. It changes colour, once the activated carbon is fully loaded with VOCs.
 
 
 
Safety Bottle Cap Kits
Part No. Description Packt Size
SV-305-K1 Bottle Cap, GL45, FFKM, 2 P ort, Y ellow, (1) Plug, (2) Fittings EA
SV-306-K1 Bottle Cap, GL45, FFKM, 4 P ort, Y ellow, (3) Plugs, (4) Fittings EA
SV-305-K4 4 x Bottle Cap, GL45, FFKM, 2 P ort, Y ellow, (4) Plugs, (8) Fittings EA
SV-306-K4 4 x Bottle Cap, GL45, FFKM, 4 P ort, Y ellow, (12) Plugs, (16) Fittings EA
 
Waste Manifolds with Fittings, Filter and Colour Indicator PART NUMBER DESCRIPTION P ACK SIZE
Part No. Description Packt Size
VSK-004-I GL38 with Filter, Indicator , Fittings EA
VSK-005-I GL45 with Filter, Indicator , Fittings EA
VSK-008-I 51mm Jerrican, with Filter , Indicator , Fittings EA
VSK-009-I 61mm Jerrican, with Filter , Indicator , Fittings EA
VSK-010-I 53B Carboy , with Filter , Indicator , Fittings EA
VSK-013-I 61mm Nampak, with Filter, Indicator , Fittings EA
VSK-014-I 70mm Hedwin, with Filter, Indicator , Fittings EA
VSK-015-I 70mm Nalgene, with Filter , Indicator , Fittings EA
VSK-016-I PP , Justrite Ctr ., with Filter , Indicator , Fittings EA
VSK-017-I SS/PTFE, Justrite Ctr ., with Filter , Indicator , Fittings EA
 
Replacement Filters
Part No. Description Packt Size
EF-100 Replacement Filter Cartridge EA
EF-100V Replacement Filter Cartridge PK/5
EF-I-100 Replacement Filter Cartridge with Indicator EA
EF-I-100V Replacement Filter Cartridge with Indicator PK/5
 
Solvent Waste Systems P ART NUMBER
Part No. Description Packt Size
VSS-005B-I 5L Solvent Waste System, Complete (Container, Manifold, Fittings, Filter , Indicator) EA
VSS-010-I 10L Solvent Waste System, Complete (Container, Manifold, Fittings, Filter , Indicator) EA
VSS-020-I 20L Solvent Waste System, Complete (Container, Manifold, Fittings, Filter , Indicator) EA
 
 Brochure
 
 

Quick Links

 

News

 

Quick Contact

 
 
   
Follow us: